Design Of High Performance Hybrid Type Digital-Feedback Low Drop-Out Regulator Using Sscg Technique

This paper proposes a high-performance Digital Feedback low-dropout voltage regulator (DF-LDO) for low power applications. In the DF-LDO regulator, digital feedback and applying spectrum spread clock generator (SSCG) technique are used to reduce output voltage ripples. In addition, it has triple operation modes i.e. coarse, fine, and retention for high efficiency and transient enhancement. The proposed hybrid DF-LDO uses arrays of PMOS transistors in coarse and fine mode whereas in retention mode, only one comparator and NMOS are active and digital controller goes into the sleep mode. This results in the reduction of the power consumption and improves the output voltage ripples. In the retention mode, minimum number of blocks operate that reduces the current consumption as compared to coarse and fine modes. To further reduce the current consumption, the comparator with hysteresis is used. The proposed circuit is designed using CMOS 55 nm process. The input voltage range is from 0.8 similar to 1.5 V and the measured output voltage range is 0.756 similar to 1.456 V. The measured line regulation is 6 mV / V, and the regulation starts when the input voltage is 0.8 V. The measured load regulation is 2.3 mV/mA for maximum load current of 5 mA. The peak current efficiency of the proposed DF-LDO is 99.996 % with a maximum output voltage ripples value of 1.9 mV. The proposed digital LDO regulator active chip area is 0.012 mm(2).