Efficient Inverted Perovskite Solar Cells Enabled By Dopant-Free Hole-Transporting Materials Based On Dibenzofulvene-Bridged Indacenodithiophene Core Attaching Varying Alkyl Chains

Inspired by the structural advantages of spiro-OMeTAD, which is the most commonly used hole-transporting material (HTM), two rationally designed HTMs with butterfly-shaped triarylamine groups based on dibenzofulvene-bridged indacenodithiophene (IDT) core (attaching hexyl and octyl chains) have been synthesized, namely, IT-C6 and IT-C8, respectively. Shorter alkyl-chain-based IT-C6 exhibits a marked increase in glass-transition temperature (T-g) of 105 degrees C, whereas IT-C8 shows a T-g of 95 degrees C. Moreover, it is demonstrated that IT-C6 exhibits a higher hole-transporting mobility, more suitable band energy alignment, better interfacial contact, and passivation effect. The inverted devices of employed HTM based on IT-C6 obtained a champion PCE of 18.34% with a remarkable fill factor (FF) of 82.32%, whereas the IT-C8-based device delivered an inferior PCE of 16.94% with an FF up to 81.20%. Both HTMs embodied inverted devices present high FF values greater than 81%, which are among the highest reported values of small molecular HTM-based PSCs. This work reveals that cutting off the symmetrical spiro-core and subsequently combining IDT (attaching tailored alkyl chains) with the spiro-linkage fluorine to construct the orthogonal molecular conformation is a significant principle for the design of promising dopant-free HTMs.