A Fully Integrated Gan-On-Silicon Gate Driver And Gan Switch With Temperature-Compensated Fast Turn-On Technique For Improving Reliability

Gallium-Nitride (GaN) high-electron-mobility transistors (HEMTs) have the advantages of low parasitic capacitance, low on-resistance $(R_{ON})$, and no reverse recovery charge loss [1–5]. Thus, using GaN HEMTs one can optimize the performance of power integrated circuits. However, today’s GaN HEMTs have serious process defects, especially depending on the selected substrate. A 650V GaN-on-Si structure is shown in Fig. 33.1.1, and there are severe heterogeneous defects between the GaN buffer layer and the Si substrate. Thus, temperature changes will seriously aggravate the hot carrier injection, and the two-dimensional electron gas (2DEG) layer in the GaN HEMT will weaken over time. The on-resistance $(R_{ON})$ and threshold voltage $(V_{TH,E})$ of 650 GaN HEMT gradually increase, and in turn, rapidly decline the reliability. Although state-of the-art gate drivers can effectively reduce the ringing at the V GS of the GaN switch [4–6], the temperature reliability problem still exists. The tri-slope gate control in [4] adjusts the sourcing current I Control to drive the gate voltage V G . The active slew-rate control method in [6] uses different gate resistors R G1 and R G2 to control the driving current I G . Both control techniques did not consider temperature-dependent threshold voltage. To completely reduce parasitic effects, monolithic integration of gate driver and GaN HEMT in GaN-on-Si process has been shown in [3, 7]. However, they did not carefully consider the reliability degradation caused by the variations of $V_{TH,E}$ and Miller plateau voltage due to temperature effects. High switching operations enlarge the temperature effect on monolithic integration.