Engineering Copper Adhesion On Poly-Epoxy Surfaces Allows One-Pot Metallization Of Polymer Composite Telecommunication Waveguides

Mass gain in the aerospace sector is highly demandable for energy savings and operational efficiency. Replacement of metal parts by polymer composites meets this prerequisite, provided the targeted functional properties are recovered. In the present contribution, we propose two innovative and scalable processes for the metallization of the internal faces of carbon fiber reinforced polymer radiofrequency waveguides foreseen for implementation in telecommunications satellites. They involve sequential direct liquid injection metalorganic chemical vapor deposition of copper and cobalt. The use of ozone pretreatment of the polymer surface prior deposition, or of cost effective anhydrous dimethoxyethane as solvent for the injection of the copper precursor, yield strongly adherent, 5 mu m Cu films on the polymer composite. Their electrical resistivity is in the 4.1-5.0 mu omega center dot cm range, and they sustain thermal cycling between -175 degrees C and +170 degrees C. Such homogeneous and conformal films can be obtained at temperatures as low as 115 degrees C. Demonstration is achieved on a polymer composite waveguide, composed of metallized 60-mm long straight sections and of E-plane and H-plane elbows, that paves the way towards the metallization of scale one devices.