A Novel, Simple And Highly Efficient Route To Obtain Prbamn2o5+Delta Double Perovskite: Mechanochemical Synthesis

In this work, a mechanochemical route was proposed for the synthesis of the PrBaMn2O5+delta (PMBO) double layered perovskite phase. The mechanochemical reaction between Pr6O11, BaO2, and MnO powders with cationic stoichiometric ratios of 1/1/2 for Pr/Ba/Mn was performed using high-energy milling conditions in air. After 150 min of milling, a new phase with perovskite structure and cubic symmetry consistent with the A-site disordered Pr0.5Ba0.5MnO3 phase was formed. When this new phase was subsequently annealed at a high temperature in an inert Ar atmosphere, the layered PrBaMn2O5+delta phase was obtained without needing to use a reducing atmosphere. At 1100 degrees C, the fully reduced layered PrBaMn2O5 phase was achieved. A weight gain was observed in the 200-300 degrees C temperature range when this fully reduced phase was annealed in air, which was consistent with the transformation into the fully oxidized PrBaMn2O6 phase. The microstructural characterization by SEM, TEM, and HRTEM ascertained the formation of the intended PrBaMn2O5+delta phase. Electrical characterization shows very high electrical conductivity of layered PBMO in a reducing atmosphere and suitable in an oxidizing atmosphere, becoming, therefore, excellent candidates as solid oxide fuel cell (SOFC electrodes).