Flower-shaped ZnO nanomaterials for low-temperature operations in NOX gas sensors

In this study, we synthesized nanostructured zinc oxide (ZnO) by using various concentrations (0–0.05 M) of cetyltrimethylammonium bromide (CTAB) as a surfactant to optimize its morphology for gas sensor applications. The optimization process was used to elucidate the morphology effects (rod-shaped and flower-shaped morphologies). The morphologies were investigated through scanning electron microscopy, in which the assembly of nanorods leading to a spherical microstructure with a CTAB concentration of 0.005 M was observed. Brunauer–Emmett–Teller isotherm measurements revealed a surface area of 7.928 g/m2 for the flower-like morphology, which was relatively higher than those of other CTAB-assisted morphologies. Such morphological features were expected to contribute toward high-performance gas-sensing. The effect of morphology variation on the resistance of ZnO microstructures was used for gas measurements. Among the varied morphologies, a sample with a spherical flower-shaped morphology exhibited a very high response at low temperatures (~29 at 25 °C) toward NOX gas (0.75 ppm) and a high selectivity toward NOx among ammonia (NH3), toluene (C6H5CH3), carbon monoxide (CO), acetone (CH3COCH3), and ethanol (C2H5OH). Raman and photoluminescence spectroscopy analyses unraveled the presence of a high density of oxygen vacancies in the sample, thereby suggesting a close link between the defective nature of the sample and the high response of the flower-like ZnO at low temperatures.