Examination Of Diesel Spray Combustion In Supercritical Ambient Fluid Using Large-Eddy Simulations

High-pressure conditions in diesel engines can often surpass the thermodynamic critical limit of the working fluid. Consequently, the injection of fuel at these conditions can lead to complex behaviors that remain only incompletely understood. This study is concerned with investigating the application of a diffuse-interface method in conjunction with a finite-rate chemistry model in large-eddy simulations of diesel spray injection and ignition in a supercritical ambient environment. The presented numerical approach offers the capability of simulating these complex conditions without the need for parameter tuning that is commonly employed in spray-breakup models. Numerical simulations of inert and reacting n-dodecane sprays - under the Engine Combustion Network Spray A and Spray D configurations - are studied, and results are compared with experimental data for liquid/vapor penetration lengths and ignition timing. In addition, parametric studies are performed to identify flow sensitivities arising from the variation in nozzle diameters between both injectors, along with the impact of low-temperature oxidation on ignition in Spray D simulations. Spray A simulations are found to be insensitive to turbulence, and predictions for penetration length and ignition behavior are in good agreement with experiments. In contrast, Spray D predictions for penetration length and ignition delay demonstrated significant sensitivities to in-nozzle turbulence, introducing uncertainty to the predicted results and stipulating the need for quantitative measurements for model evaluation.