Substrate Temperature Dependent Microstructure and Electron-Induced Secondary Electron Emission Properties of Magnetron Sputter-Deposited Amorphous Carbon Films.

For special instruments or equipments including particle accelerators, space microwave devices and spacecrafts, the suppression for electron-induced secondary electron emission (SEE) occurring on the component surfaces is of great significance due to a negative influence caused by SEE on their normal operations. In this paper, amorphous carbon (a-C) films were prepared on stainless-steel substrates by radio frequency magnetron sputtering, and the effects of substrate temperature (T-s) and continuous electron bombardment on the microstructure and secondary electron emission yield (SEY) of a-C film were investigated in order to achieve a better inhibition for SEE. The experimental results show that a rise of T-s during the a-C film preparation is conducive to a SEY reduction and an increase of multipactor threshold due to the increases of surface roughness and sp(2) bond content. In addition, although the SEY of a-C film has a slight increase with the rise of electron bombardment time, the a-C film sample with a lower SEY keeps its lower SEY all the time during continuous electron bombardment. The a-C film prepared at T-s of 500 degrees C has the lowest SEY peak value of 1.09 with a reduction of 30.6% in comparison with the stainless-steel substrate.