In Situ Fabrication Of Cuo/Uhmwpe Nanocomposites And Their Tribological Performance

Polymer nanocomposites present remarkably enhanced mechanical and tribological properties with respect to their matrices even at a low loading of nanofillers. Here, cupric oxide (CuO) nanoparticles (nano-CuO) were in situ filled into ultra-high-molecular-weight polyethylene (UHMWPE) to inhibit a possible agglomeration encountered in the preparation by mechanical mixing. The filled CuO nanoparticles were highly dispersed in UHMWPE with a reliable interface combination. The CuO nanoparticles in the matrix play a role for heterogeneous nucleation, resulting in an enhancement in degree of crystallinity of UHMWPE. The elastic modulus and the elongation at break of the nanocomposites also presented an improvement, indicating a good compatibility between the nano-CuO and the matrix. The average sliding friction coefficient of UHMWPE against 45(#) steel was reduced by up to 34% after the in situ filling of CuO nanoparticles, and the wear mechanism was found to transform from adhesive to fatigue wear after the introduction of nano-CuO. It is concluded that the in situ filling can improve the dispersion of CuO nanoparticles in UHMWPE, and markedly promote the mechanical properties and tribological performance of UHMWPE. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47925.