Patellar Tendon Repair Augmentation With a Knotless Suture Anchor Internal Brace: A Biomechanical Cadaveric Study.

Background: Patellar tendon repair with braided polyethylene suture alone is subject to knot slippage and failure. Several techniques to augment the primary repair have been described. Purpose/Hypothesis: The purpose was to evaluate a novel patellar tendon repair technique augmented with a knotless suture anchor internal brace with suture tape (SAIB). The hypothesis was that this technique would be biomechanically superior to a non-augmented repair and equivalent to a standard augmentation with an 18-gauge steel wire. Study Design: Controlled laboratory study. Methods: Midsubstance patellar tendon tears were created in 32 human cadaveric knees. Two comparison groups were created. Group 1 compared #2 supersuture repair without augmentation to #2 supersuture repair with SAIB augmentation. Group 2 compared #2 supersuture repair with an 18-gauge stainless steel cerclage wire augmentation to #2 supersuture repair with SAIB augmentation. The specimens were potted and biomechanically loaded on a materials testing machine. Yield load, maximum load, mode of failure, plastic displacement, elastic displacement, and total displacement were calculated for each sample. Standard statistical analysis was performed. Results: There was a statistically significant increase in the mean +/- SD yield load and maximum load in the SAIB augmentation group compared with supersuture alone (mean yield load: 646 +/- 202 N vs 229 +/- 60 N; mean maximum load: 868 +/- 162 N vs 365 +/- 54 N; P < .001). Group 2 showed no statistically significant differences between the augmented repairs (mean yield load: 495 6 213 N vs 566 +/- 172 N; P = .476; mean maximum load: 737 +/- 210 N vs 697 +/- 130 N; P = .721). Conclusion: Patellar tendon repair augmented with SAIB is biomechanically superior to repair without augmentation and is equivalent to repair with augmentation with an 18-gauge stainless steel cerclage wire.