Fabrication and MFM study of 60 nm track-pitch discrete track media.
NANOTECHNOLOGY(2011)
摘要
Discrete track magnetic recording media with a 60 nm track pitch and prewritten servo patterns were fabricated and tested for read/write performance, and a feasibility analysis of the embedded servo was performed. The fabrication process consisted of ultraviolet nanoimprint lithography (UV-NIL) and sequential ion beam etching on a conventional perpendicular magnetic recording medium. Magnetic patterns were written to the fabricated tracks at 700 kilo flux changes per inch (kFCI) using a spin stand and were read using magnetic force microscopy (MFM), with a resulting signal-to-noise ratio (SNR) of 12.15 dB. The servo pattern was also visualized with MFM. These results demonstrated the feasibility of writing to a 30 nm wide discrete data track and the workability of the embedded servo pattern.
更多查看译文
关键词
signal to noise ratio,feasibility analysis,ion beam,magnetic force microscopy
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要