Effects of γ-sterilization on butyltin homogeneity and content in sediments: a GC–ICP–MS study

A GC–ICP–MS method based on extraction and alkylation of butyltins with sodium tetraethylborate was used to quantitatively assess the fate of these analytes in solutions and sediments following exposure to γ-irradiation. The effects of a 2.5 Mrad sterilization dose on three butyltin species in both methanolic calibration solutions and in sediment matrices were investigated. Although significant losses of tributyltin (TBT, 90%), dibutyltin (DBT, 100%) and monobutyltin (MBT, 80%) were detected in standard solutions prepared in methanol following γ-irradiation, no species inter-conversion occurred. Some degradation of TBT (38%) and DBT (32%) but no significant change in MBT content was found using a spiked sediment CRM HISS-1. Conversion DBT to MBT in spiked HISS-1 was deduced. Much smaller degradation of TBT (16% loss) and 10% loss of DBT by conversion to MBT (14% gain) was registered using a sediment blend of PACS-2 and HISS-1 (SOPH). Despite some initial losses of TBT and DBT due to irradiation, better than 2% RSD in both TBT and DBT concentrations measured in twelve different bottles of blended sediment SOPH were obtained, indicating the material may be considered homogeneous for these analytes. Results from a long-term five-year stability study of PACS-2 show that all three butyltins are stable during storage at 4 °C followed with 2.5 Mrad minimum dose of γ-irradiation sterilization treatment.