Development Of A 100 Hp Synchronous Motor With Hts Field Coils

A 3-phase, 100 hp, 4 pole, 1800 rpm superconducting synchronous motor built and tested in Korea Electrotechnology Research Institute(KERI). This machine consists of HTS rotor and air-core stator. The HTS field windings are composed of the double-pancake coils wound with AMSC's stainless steel-reinforced Bi-2223 tape conductor. These were assembled on the support structure and fixed by a bandage of glass-fiber composite. The cooling system is based on the heat transfer mechanism of the thermosyphon by using GM cryocooler as cooling source. The cold head is in contact with the condenser of a Ne-filled thermosyphon. The rotor assembly was tested independently at the stationary state and combined with stator. The open circuit, no-load, and short circuit characteristic were obtained. Also, load tests in motor mode driven by inverter and generator mode connected to resister load bank were conducted. This paper will present design, construction, and experimental test results of the 100 hp HTS machine.