Cyclotron resonance heating systems for SST-1

NUCLEAR FUSION(2006)

引用 24|浏览43
暂无评分
摘要
RF systems in the ion cyclotron resonance frequency (ICRF) range and electron cyclotron resonance frequency (ECRF) range are in an advanced stage of commissiong, to carry out pre-ionization, breakdown, heating and current drive experiments on the steady-state superconducting tokamak SST- 1. Initially the 1.5 MW continuous wave ICRF system would be used to heat the SST- I plasma to 1.0keV during a pulse length of 1000s. For different heating scenarios at 1.5 and 3.0 T, a wide band of operating frequencies (20-92 MHz) is required. To meet this requirement two CW 1.5 MW rf generators are being developed in-house. A pressurized as well as vacuum transmission line and launcher for the SST-1-ICRF system has been commissioned and tested successfully. A gyrotron for the 82.6 GHz ECRF system has been tested for a 200kW/1000s operation on a water dummy load with 17% duty cycle. High power tests of the transmission line have been carried out and the burn pattern at the exit of transmission line shows a gaussian nature. Launchers used to focus and steer the microwave beam in plasma volume are characterized by a low power microwave source and tested for UHV compatibility. Long pulse operation has been made feasible by actively cooling both the systems. In this paper detailed test results and the present status of both the systems are reported.
更多
查看译文
关键词
cyclotron resonance,transmission line,continuous wave,steady state,duty cycle,electron cyclotron resonance
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要