Automated delivery of codes for charge in radiotherapy]

Background and Purpose: For the medical billing of Radiotherapy every fraction has to be encoded, including date and time of all administered treatments. With fractions averaging 30 per patient and about 2,500 new patients every year the number of Radiotherapy codes reaches an amount of 70,000 and more. Therefore, an automated proceeding for transferring and processing therapy codes has been developed at the Department of Radiotherapy Freiburg, Germany. This is a joint project of the Department of Radiotherapy, the Administration Department, and the Central IT Department of the University Hospital of Freiburg. Material and Methods: The project consists of several modules whose collaboration makes the projected automated transfer of treatment codes possible. The first step is to extract the data from the department's Clinical Information System (MOSAIQ). These data are transmitted to the Central IT Department via an HL7 interface, where a check for corresponding hospitalization data is performed. In the further processing of the data, a matching table plays an important role allowing the transformation of a treatment code into a valid medical billing code. In a last step, the data are transferred to the medical billing system. Results and Conclusion: After assembling and implementing the particular modules successfully, a first beta test was launched. In order to test the modules separately as well as the interaction of the components, extensive tests were performed during March 2006. Soon it became clear that the tested procedure worked efficiently and accurately In April 2006, a pilot project with a few qualities of treatment (e.g., computed tomography, simulation) was put into practice. Since October 2006, nearly all Radiation Therapy codes (similar to 75,000) are being transferred to the comprehensive Hospital Information System (HIS) automatically in a daily routine.