Optimization of a roller levelling process for Al7001T9 pipes with finite element analysis and Taguchi method

This paper is concerned with the optimization of process parameters for a roller leveller that is an indispensable piece of equipment to eliminate the undesirable curvature of a thin-walled aluminum pipe. Optimization of process parameters has been carried out for a multi-staggered-type 14-roller leveller. A finite element model of a multi-staggered 14-roller leveller was constructed for numerical analysis. The analysis is carried out with the fractional model and the Taguchi method for evaluation of the effect of process parameters such as the intermesh and the slanted angle of rollers. The response variable is set to the plastic strain along the pipe length. The optimum combination of process parameters is determined from the numerical result and confirmed by experiments. The comparison of the numerical result with the experimental one shows good coincidence for its validity and reliability.