WeChat Mini Program
Old Version Features

    • Four-Point Trajectory Tracking Control of PMSMs with Improved Dynamic Response and Steady-State Efficiency

    Qingguo Sun, Shenglong He,Xu Liu,Feng Niu,Chun Gan,Guanlong Jia

    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS（2024）

    Cited 0|Views5
    Abstract
    This article proposes a novel four-point trajectory tracking control for permanent magnet synchronous motors (PMSMs) to improve the dynamic response speed performance and steady-state efficiency in full-speed range. In the dynamic process, three points are defined and calculated in real-time, each located within three speed stages, to automatically adjust the current trajectory with maximum torque capability. In the steady-state region, an innovative intersection point is established between the voltage constraint circle and the maximum torque per ampere curve, dividing the minimum copper loss curve into two distinct trajectories. Through comparison with the reference current value, this approach dynamically optimizes the minimum rms value of operating current. The proposed whole current trajectory is constrained by four points with wide universality for various PMSMs, and automatically switched to match the dynamic and steady-state conditions based on the implied speed information from dq -axis currents without extra calculation of turning point in full-speed range. Simulations and experiments are carried out to validate the feasibility and superiority of the proposed current trajectory scheme.
    More
    Translated text
    Key words
    Motors,Trajectory,Torque,Steady-state,Copper,Voltage control,Trajectory tracking,Dynamic response,full-speed range,permanent magnet synchronous motor (PMSM),steady-state efficiency,trajectory optimization
    求助PDF
    上传PDF
    View via Publisher
    Bibtex
    收藏
    AI Read Science
    AI Summary
    AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
    Example
    Background
    Key content
    Introduction
    Methods
    Results
    Related work
    Fund
    Key content
    • Pretraining has recently greatly promoted the development of natural language processing (NLP)
    • We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
    • We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
    • The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
    • Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
    Upload PDF to Generate Summary
    Must-Reading Tree
    Example
    Generate MRT to find the research sequence of this paper
    Data Disclaimer
    The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
    Chat Paper
    Summary is being generated by the instructions you defined