Effect of CaO/MgO on Rheological Properties and Structure of CaO-MgO-SiO2-Al2O3-50% TiO2 Slag with SiO2/Al2O3=1.0
CERAMICS INTERNATIONAL（2024）
Cent South Univ
Abstract
The rheological properties, including viscosity, melting temperature, surface tension, density, and viscous activation energy (E eta) were systematically investigated in the CaO-MgO-SiO2-Al2O3-50 % TiO2 slag system with SiO2/Al2O3 = 1.0. The effect of CaO/MgO on the structure and phase composition of the slag was studied using Raman spectroscopy and X-ray diffraction (XRD). The results of viscosity properties indicate that as the CaO/MgO ratio in the slag increase, viscosity and the viscous activation tend to decrease. Melting temperature and surface tension decreases with increasing CaO/MgO, while density increases. As the CaO/MgO ratio in the slag increases, polymerization decreases, leading to the dissociated basic oxides into metal cations and oxygen anions. This addition of basic oxides provides more O2-, increasing the O/Si ratio, disintegrating complex silica-oxygen composite ions into simple silica-oxygen composite anion, and reducing viscosity. Anosovite (MgTi2O5), CaAl2Si2O8, Mg (Al, Ti)(2)O-4, spinel (MgAl2O4), augite (Ca (Mg, Fe, Al) (Al, Si)(2)O-6) and Ca12Al14O33 were identified as the primary phases in slag. The appropriate CaO/MgO should not exceed 0.76. These findings will serve as a valuable technical foundation to support the development of the direct reduction smelting process for the comprehensive utilization of vanadium titanomagnetite.
MoreTranslated text
Key words
Viscosity,Surface tension,Density,Viscous activation energy,Melting temperature
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined