DDPM Simulation for Fluidization Behavior and Reduction of Iron Ore Fines with Hydrogen in the Fluidized Bed
Metallurgical and Materials Transactions B（2024）
University of Science and Technology Beijing
Abstract
In this paper, the hydrogen direct reduction of iron ore fines is numerically studied by using the Dense Discrete Phase Model (DDPM) in the fluidized bed. The fluidization behavior at different inlet gas velocities (Ug) as well as the influence of Ug and hydrogen concentration on reduction degree (RD) are comprehensively investigated. The result indicates the increase of time-averaged solids volume fraction for the same cross-sectional heights with increasing Ug when the bed height (H) exceeds 0.06 m. Furthermore, the reduction rate of mineral powder increases with higher Ug value, and the RD reaches almost 100 pct after 4000 seconds of reduction time with Ug ranging from 0.35 to 0.65 m/s. The reduction rate increases noticeably with the increase of hydrogen concentration in the range of 10 to 100 pct, and Fe2O3 can be completely converted to Fe under condition of 65 pct H2 concentration after 4000 seconds. Moreover, higher H2 concentration leads to faster rate of Fe2O3 consumption and Fe production. The mass fraction peak values of Fe3O4 and FeO are in the range of 0.29 to 0.34 and 0.21 to 0.24 under different H2 concentrations, respectively.
MoreTranslated text
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined