Improved structure and enhanced properties of detonation sprayed W coating via hot isostatic pressing

Tungsten has garnered significant attention for its superior performance as a plasma-facing material in tokamak devices. However, its hardness and high ductile-to-brittle transition temperature present challenges for its application in plasma-facing components. To address these issues, this study employs the detonation spraying (DS) technique to prepare tungsten coatings on a TZM alloy substrate and further optimizes their properties through hot isostatic pressing (HIP) treatment. Advanced characterization techniques were utilized to conduct a detailed microstructural and compositional analysis of the coatings. The results indicated that the HIP treatment significantly reduced the porosity of the coatings, improving their density and overall quality. Additionally, HIP treatment led to a decrease in internal stress, a reduction in dislocations, and the grain growth within the coatings. The study also discussed how the HIP process improved the microstructure of the DS tungsten coatings through these mechanisms, thereby enhancing the coatings' thermodynamic properties. Mechanical property tests revealed that the coatings treated with HIP exhibited higher bonding strength and lower hardness, attributed to the increase in grain size and the reduction in dislocation density within the coatings. Thermal property tests demonstrated that the HIP-treated coatings possessed higher thermal diffusivity and specific heat capacity in the temperature range of 100 to 500 °C. Furthermore, the performance of the coatings under transient high heat flux conditions was significantly improved after the HIP treatment, showing better resistance to the thermal shock and cracking. These findings are of great importance for understanding the performance enhancement of DS tungsten coatings in nuclear fusion reactor applications via HIP, especially as candidate materials for the first wall of tokamak devices.