High performance Ce0.8Nd0.2O2-δ-carbonate hollow fiber membrane for high-temperature CO2 separation

Ceramic-carbonate dual phase (CCDP) membrane consisting of oxygen ionic conductor and molten carbonate has potential applications in clean energy delivery as it enabling the direct CO2 separation or capture at the elevated temperatures. The performance of previous CCDP membranes is not ideal either with a low CO2 flux or with a poor operational stability. In the present work, we looked at the CeO2-based oxygen ionic conductor (neodymium doped cerium (NDC)) as the porous ceramic hollow fiber support to form NDC-carbonate hollow fiber membranes. The NDC hollow fiber was fabricated by the combined phase inversion and sintering techniques and the preparation conditions were optimized to better accommodate the carbonate phase and maintain the mechanical stability. The NDC hollow fibers possessed good bending strength, reaching 91.5 MPa upon sintering at 1500 °C. The effects of feed gas composition and sweep flow rates on the CO2 separation performance were carefully investigated. The resultant dual phase hollow fiber membranes exhibited appreciably high CO2 permeation fluxes at temperatures exceeding 800 °C, which was required to activate both conductions of oxygen and carbonate ions. The achieved maximum CO2 flux of the optimized NDC-carbonate hollow fiber membranes was up to 5.08 mL min-1 cm-2 with 50%CO2-50%N2 as the feed gas at 900 °C. At 700 °C, the membrane exhibited a relatively stable CO2 permeation behavior over 120 h and the spent membrane maintained a stable structure. The high flux and good operational stability of the developed membrane make a huge step towards practical applications.