Validation of HPLC-DAD method for analysis of paracetamol and potassium sorbate in liquid oral formulations and its application to forced degradation study

AbstractDue to the frequent use of paracetamol formulations, it is useful to develop an analytical technique for the determination of intact paracetamol in presence of other drugs and excipients or the degradation products. In this study, a simple, isocratic, fast, specific, accurate and precise stability-indicating high performance liquid chromatography (HPLC) method has been developed and validated for simultaneous quantitative determination of paracetamol (PCM) and potassium sorbate (PS) in oral liquid formulations. The chromatographic separation was achieved on Zorbax SB C18 column (150 × 4.6 mm, 5 µm) with Zorbax SB C18 precolumn (12.5 × 4.6 mm, 5 µm) using distilled water pH 2 with ortho-phosphoric acid and acetonitrile (70:30, v/v) as a mobile phase, and UV detection at 235 nm. The temperature of the column was kept constant at 25 °C. The method was validated according to International Conference on harmonization (ICH) guidelines. The method demonstrated excellent linearity, with a correlation coefficient of 0.9996 and 0.9998 for PCM and PS, respectively, over the concentration ranges of 10–600 μg mL−1 (PCM) and 6–500 μg mL−1 (PS). The retention time was found to be 1.98 and 4.86 min for PCM and PS, respectively. Oral liquid formulation samples were subjected to various stress conditions (acidic and alkaline hydrolysis, as well as oxidative, heat and photolytic degradation) for the purpose of forced degradation study. The major degradation of paracetamol was achieved in acidic and basic stress conditions, while thermal and photolytic degradation generally had the least influence. On the other hand, potassium sorbate was highly susceptible to photolytic degradation. It was also shown that the formulation has strong influence on stability of tested compounds. Forced degradation studies demonstrated the stability-indicating power of the method and can be used to assess the stability of paracetamol and potassium sorbate in oral liquid formulations.