Plasma-sprayed bulk-like yttria-stabilized zirconia coatings for solid oxide fuel cell electrolytes based on liquid-phase sintering-induced interfacial healing

To achieve a coating density meeting the solid oxide fuel cell (SOFC) electrolyte requirements of high gas tightness and ionic conductivity, in this study, a new interface healing densification process based on a liquid-phase sintering induction mechanism was conducted on plasma-sprayed 8 mol% Y2O3-stabilized ZrO2 (8YSZ) coatings. Using Fe2O3 and Bi2O3 as healing additives, metallurgical healing of unbound interfaces was achieved by impregnating the additives into the gap interfaces, followed by liquid-phase sintering at 1200 and 1050 °C. After healing, the YSZ coating exhibited a dense bulk-like microstructure with a significant reduction in the gas leakage rate by two orders of magnitude, and the oxygen ion conductivity of the coating was significantly increased. The YSZ coating healed with the Fe2O3 additive showed an oxygen ionic conductivity nearly one order of magnitude higher than that of the as-sprayed coating, reaching more than 80% of the value of the high-temperature-sintered YSZ bulk.