Static Equivalence Method of Power Grid Based on Genetic Algorithm

When the electromagnetic transient simulation of a large-scale power grid is carried out, because the simulation is limited by the scale of simulation software, it is necessary to divide the grid into internal and external grids, and the external grid is modeled with equivalent simplification. Aiming at resolving the difficulties of the traditional grid equivalence method, such as a cumbersome calculation process and harsh calculation conditions, a static grid equivalence method based on the genetic algorithm is proposed in this paper. The method first constructs an external grid equivalence network, which includes coupling branches between boundary nodes, and each boundary node is connected to the external grid equivalence power supply through the branches. Then, the external grid equivalence model is used to establish an optimization model for solving the equivalence network parameters based on the information of the internal network, the difference of the power input from the external grid to the boundary nodes before and after equivalence is used as the objective function, and the genetic algorithm is used to realize the iterative optimization of the objective function to obtain a set of optimal post-equivalence network model parameters so that the state variables of the internal power grid before and after the equivalence are matched. The accuracy and effectiveness of the proposed method are verified through simulation with the CERPI36V7 node system.