Dielectric response characteristics and moisture exposure evaluation of oil-paper insulation based on microstrip ring resonator

Moisture ingress significantly accelerates the aging of oil-paper insulated equipment, making accurate assessment of moisture content critical for the operation and maintenance of oil-immersed insulated power equipment. In this paper, a novel method for rapid moisture content evaluation is proposed based on a microstrip ring resonator (MRR) designed with a fundamental frequency of 1.16 GHz. A calculation model for the dielectric response analysis of MRR is established to characterize dielectric properties of the material superimposed on the substrate. ANSYS HFSS electromagnetic simulation software was used to study the impact of dielectric material thickness and the substrate on the MRR test results. Experimental measurement demonstrated that the maximum deviation in resonance frequency was merely 0.542 %. The dielectric properties of uniformly and non-uniformly damp insulating pressboard in the frequency band 1 ∼ 6 GHz were analyzed. The MRR test results were compared with those of the standard resonant cavity method and frequency domain dielectric spectroscopy (FDS) test. Employing the regression algorithm and curve analysis, moisture assessment models for both uniformly and non-uniformly damp oil-paper insulation were established. The experimental results show that the MRR test can clearly distinguish between the pressboard samples with varying moisture levels under uniform conditions, with a maximum moisture evaluation error of 8.19 %. The results demonstrate that the MRR test method, requiring only 56 s, can quickly and effectively evaluate the moisture content of insulating pressboard.