Preparation of spinnable mesophase pitch from pyrolyzed fuel oil by pressurized heat treatment and its application of carbon fiber

Petroleum residues are produced as by-products of petroleum refining. Recently, various effective non-fuel uses of petroleum residues have been considered toward a carbon-neutral society. Pyrolysis fuel oil (PFO) is one of the petroleum residues. Advanced utilization of PFO for future non-combustion applications is required. In this study, Mesophase pitch-based carbon fibers (MPCF) were successfully produced from PFO. Spinnable mesophase pitch (SMP), a precursor of MPCF, was prepared using PFO as a raw material through the pressurized heat treatment at 420°C–430°C. PFO is from the naphtha catalytic cracking process for ethylene production and is mainly composed of 2–4 condensed polycyclic aromatic hydrocarbons (PAHs). The high temperature pressurized heat treatment could result in the PFO-derived SMPs with yield of 23.0 wt.% and excellent spinnability. On the other hand, without pressurized heat treatment, the yield was 8.5 wt.%. This indicates that pressurized heat treatment significantly contributed to the yield improvement. In addition, the preference for the conversion of PFO molecules into highly condensed PAHs via cata-condensation during pressurized heat treatment at 420°C–430°C was observed, which may be the main reason for the high yield and excellent spinnability of the resulting SMPs. As a result, the obtained PFO-derived SMPs though the such high-temperature pressurized heat treatment provided the typical radial-random transversal textures and general mechanical performances of MPCF: The tensile strength and Young's modulus of the PFO-derived MPCF graphitized at 2400°C showed high values of 1.9–2.7 GPa and 554–635 GPa, respectively.