Effect of Bulk Nanobubbles on the Flocculation and Filtration Characteristics of Kaolin Using Cationic Polyacrylamide

This study investigated the influence of bulk nanobubbles (NBs) on the flocculation and filtration behavior of kaolin suspensions treated with cationic polyacrylamide (CPAM). Traditionally, flocculation relies on bridging mechanisms by polymers like CPAM. The present work examines the possibility of combining NBs with CPAM to achieve more efficient kaolin separation. The settling behavior of kaolin suspensions with and without bulk nanobubbles was compared. The results with 2 mL CPAM and 300 s settling time revealed that bulk NBs significantly enhanced flocculation efficiency, with supernatant zone height reductions exceeding 50% compared to CPAM alone, indicating a faster settling rate resulting from bulk NBs. This improvement in the settling rate is attributed to NBs’ ability to reduce inter-particle repulsion (as evidenced by a shift in zeta potential from −20 mV to −10 mV) and bridge kaolin particles, complementing the action of CPAM. Additionally, the study demonstrated that bulk NBs improved dewatering characteristics by lowering the medium resistance and specific cake resistance during filtration. These findings pave the way for the utilization of bulk NBs as a novel and efficient strategy for kaolin separation in mineral processing, potentially leading to reduced processing times and lower operational costs.