Effects of nanofillers on the physical, mechanical, and tribological behavior of carbon/kenaf fiber–reinforced phenolic composites

This research investigates the effect of kenaf/carbon fiber reinforcement with the addition of nanofillers such as multi-walled carbon nanotubes (MWCNT) and cellulose nanocrystal (CNC) in the phenolic matrix composite. Three different types of samples were made using short carbon fiber, kenaf fiber (KF), BaSO4, Cashew dust, MWCNT, and CNC. Sample 1 contains 40 wt% of carbon fiber with binders reinforced in the phenolic matrix, whereas, in sample 2, carbon fiber has been replaced with KF in the MWCNT-modified phenolic matrix. On the other hand, in sample 3, carbon fiber has been replaced with KF in a CNC-modified phenolic matrix. The physical, mechanical, and tribological properties were investigated and compared. The results showed that sample 1 exhibited higher mechanical performance compared to other samples. On the other hand, the least wear loss and a high coefficient of friction were observed for Sample 2 compared to Samples 1 and 3. Even though KF-based composites exhibited slightly lower mechanical performance, they showed excellent tribological behavior.