Achieving ultra-strong and ductile CoNi-based FCC multi-principal element alloys via alloying with refractory Mo and W

FCC single-phase multi-principal element alloys (MPEAs) often suffer from insufficient strength, which limits their wide applications. Here a CoNi-based FCC MPEA (Co44Ni44Mo9W3, at. %) was designed by alloying with refractory Mo and W. The Co44Ni44Mo9W3 alloy possesses an ultrahigh yield strength of ∼1050 MPa and good ductility of ∼30 % at ambient temperature. The excellent mechanical properties were correlated to its superior lattice friction stress and grain boundary strengthening compared to most reported FCC MPEAs and conventional alloys. By density-functional theory calculations, such extraordinary mechanical properties were further attributed to its high lattice distortion, low intrinsic stacking fault energy and high unstable stacking fault energy due to the addition of Mo and W. Transmission electron microscopy investigations revealed that the high strength-ductility combination arises from the synergistic effect of planar slip bands, stacking faults and deformation nano-twins.