Comparative study of the interface passivation properties of LiF and Al₂O₃ using silicon MIS capacitor

Lithium fluoride (LiF) is currently a very popular dielectric material used as a passivation or transport layer in a variety of applications, especially in high-efficiency solar cells. Despite this, its conduction properties and interface behavior with silicon remain largely unexplored. In this work, a LiF metal-insulator-semiconductor (MIS) structure is fabricated and characterized, and its properties are compared to the well-understood aluminum oxide (Al2O3) MIS structure. First, a higher current density in LiF compared to Al(2)O(3 )is highlighted, as well as its PN junction-like behavior with n-type silicon (n-Si), being rather unconventional for a dielectric layer. C-V measurements showcase the likely presence of an interface defect, causing an increase in the apparent doping and a shift in the flatband voltage V-FB by +70 meV. This defect is found to be of the acceptor type, which renders the interface fixed charge more negative and improves the field-effect passivation in the case of a negative Q(f). Finally, a density of interface states D-it approximate to 2 x 10 (11) cm( - 2) eV( - 1) was found for LiF/n-Si, which is a low value showing appropriate chemical passivation at the interface. Overall, this work enables us to shed more light on the interface properties of LiF on n-Si, which is an essential step toward its wider use in state-of-the-art solar cells and other silicon-based devices.