Seismically induced hillslope disturbance, sediment connectivity and mass wasting: Insights from the 2008 Wenchuan earthquake

A mega-earthquake in a mountainous region can trigger thousands of landslides. Subsequently, these loose coseismic materials will experience the erosion-transport-sediment process. This process is closely associated with a series of cascading hazards, such as landslides, debris flows and floods. The disturbance and legacy effects of earthquakes have become the focus of attention for post-earthquake reconstruction and disaster mitigation. By combining the modeling of seismic-induced landslide magnitude with an analysis of the coseismic material sediment connectivity and transfer processes, we assessed the impacts of the 2008 Wenchuan earthquake on the mass balance and subsequent geohazard activities. The 2008 Wenchuan earthquake produced 22,785 Mt of deposit storage, 37.9 % of which (-8636 Mt) is connected to the channels and prone to erosion and transfer by hydrodynamic forces, and the remaining 62.1 % (-14,149 Mt) was deposited on hillslopes far from the channel network and contributed little to the sediment dynamics. Long-term field observations found a causal relationship between decreasing surface erosion rate and gradual healing of co-seismic deposits due to coarsening by progressive removal of fine grains. We evaluated the residence time of fine-grained (<0.25 mm) landslide materials using the post-earthquake sediment evacuation rate and identified three stages regarding the enhanced erosion and surface mass wasting after the 2008 Wenchuan earthquake, namely, the high activity period (within 40.6 +/- 5.4 years), the low activity period (40.6 +/- 5.4-107.1 +/- 14.2 years), and the steady period (after 107.1 +/- 14.2 years). This has important implications for the hazard assessment of landslides and debris flows in understanding and modeling the post-seismic geohazard evolution over multiple timescales.