Broadband Beam-Scanning Phased Array Based on Microwave Photonics

A one-dimensional active broadband phased array based on microwave photonics that works in the Ku band is proposed to achieve a large instantaneous bandwidth. The phased array uses a feeding network based on microwave photonics to provide the true time delay and a wide operating bandwidth. The array is mainly composed of a broadband horn antenna, an RF transmitting/receiving module, an optical network module, and a temperature control module. The form of a horn was selected for the antenna unit, and it was fed through a waveguide to obtain a wide operating bandwidth. An optical fiber delay line that could realize the true time delay at different frequencies was adopted for the time-delay module of the optical network. To obtain a large time delay and small quantization error, a hybrid time-delay diagram utilizing electrical and optical time delays was used in the design. In addition, a temperature control module was added to the antenna system to enhance the stability of the photonic time-delay module. For verification, a prototype of the presented antenna system was designed, fabricated, and measured. The experimental results showed that the optical phased array antenna was able to scan +/- 20 degrees from 12 GHz to 17 GHz, and the beam pointing did not appear to be offset over the wide operating bandwidth.