Heat storage and release characteristics of a prototype CaCO3/CaO thermochemical energy storage system based on a novel fluidized bed solar reactor

CaCO3/CaO thermochemical energy storage (TCES) system has a high heat storage density (1780 kJ/kg) along with high heat storage and release temperature (650–850 °C), which can be applied to concentrated solar power (CSP) technology utilizing CO2 Brayton cycles to improve power generation efficiency. There are several problems to be urgently resolved in current CaCO3/CaO solar calciners, such as poor heat and mass transfer and low thermochemical efficiency. This paper proposed a prototype CaCO3/CaO TCES system based on a novel fluidized bed solar reactor, which has a serrated arc surface in alignment with the direction of the incident solar rays to receive concentrated solar energy. The natural limestone particles were used as the reactive particles. The effects of operating modes (intermittent/continuous), initial mass of reactive particles, and initial carbonation temperature Tcar,initial on the heat storage and release characteristics of the TCES system were experimentally explored. During the carbonation reaction stage, the effective carbonation degrees in the continuous mode were generally higher than in the intermittent mode under the experimental conditions and declined at a slower rate. The reactive particles were recovered from the reactor for microstructural characterization after completing the experiments, high-temperature particle agglomeration and pore structure clogging were directly responsible for the decrease of the effective carbonation degree. In the continuous mode, the average thermochemical and total thermal efficiencies of 24.7 % and 53.5 % were obtained in the 1st calcination reaction, respectively, which represents significant advantages over other CaCO3/CaO solar calciners. The novel fluidized bed reactor demonstrated excellent fluidization in the experiments and did not exhibit mechanical deformation after multiple experiments under non-uniform concentrated radiation provided by an 84 kWe high-flux solar simulator. Overall, this paper provides a successful gas-solid reactor design to be coupled with CSP technology.