Investigation of pulse burst characteristics in an LD end-pumped Er:Yb:Glass/Co:MALO microchip 1.5 μm laser

Burst mode lasers, characterized by a sequence of high-intensity pulses, are integral to applications such as the examination of turbulent flows and optical metrology. This study investigates a 1.5 μm passively Q-switched pulse burst microchip laser, end-pumped by a 940 nm laser diode. Utilizing Er:Yb:glass as the gain medium and Co:MALO for passive Q-switching, delivering a pulse width of 5.5 ms and a repetition rate of 10 Hz. When the initial transmittance of the saturable absorber was 93 % and the maximum absorbed pump energy reached 85 mJ, we successfully generated up to 12, 8, and 4 pulses within a burst at 1.5 μm. These results corresponded to cavity lengths of 12 mm, 13 mm, and 14 mm, respectively. By using a saturable absorber with an initial transmittance of 90.5 %, a higher single pulse energy and a narrower pulse width were realized. The narrowest pulse width was reduced to 6.2 ns, with a corresponding pulse energy of 272 μJ. The peak power in the Er:Yb:glass/Co:MALO pulse burst laser reached an estimated 43.9 kW.This research provides valuable experimental and theoretical insights for the development of human eye-safe lasers with adjustable pulse sequences.