Real-world data capture of daily limb loading using force-sensing insoles: Feasibility and lessons learned

Force-sensing insoles are wearable technology that offer an innovative way to measure loading outside of laboratory settings. Few studies, however, have utilized insoles to measure daily loading in real-world settings. This is an ancillary study of a randomized controlled trial examining the effect of weight loss alone, weight loss plus weighted vest, or weight loss plus resistance training on bone health in older adults. The purpose of this ancillary study was to determine the feasibility of using force-sensing insoles to collect daily limb loading metrics, including peak force, impulse, and loading rate. Forty-four participants completed a baseline visit of three, 2-minute walking trials while wearing force-sensing insoles. During month two of the intervention, 37 participants wore insoles for 4 days for 8 waking hours each day. At 6-month follow-up, participants completed three, two-minute walking trials and a satisfaction questionnaire. Criteria for success in feasibility was defined as: a) > 60 % recruitment rate; b) > 80 % adherence rate; c) > 75 % of usable data, and d) > 75 % participant satisfaction. A 77.3 % recruitment rate was achieved, with 44 participants enrolled. Participants wore their insoles an average of 7.4 h per day, and insoles recorded an average of 5.5 h per day. Peak force, impulse, and loading rate collected at baseline and follow-up were 100 % usable. During the real-world settings, 87.8 % of data was deemed usable with an average of 1200 min/participant. Lastly, average satisfaction was 80.5 %. These results suggest that force-sensing insoles appears to be feasible to capture real-world limb loading in older adults.