In Situ Center Wavelength Control of AlInN/GaN Distributed Bragg Reflectors with In Situ Reflectivity Spectra Measurements
physica status solidi (b)(2024)
摘要
An in situ control of a center wavelength in a 40‐pair AlInN/GaN distributed Bragg reflector (DBR) for GaN‐based vertical‐cavity surface‐emitting lasers (VCSELs) with an in situ reflectivity spectra measurement is proposed and developed. A procedure of the in situ control consists of the following three steps: 1) to grow an initial 5‐pair DBR; 2) to obtain the center wavelength value just after the initial DBR growth by the in situ reflectivity spectra measurement; and 3) to adjust growth times as a result of the obtained center wavelength value and continue the remaining 35‐pair DBR. It is experimentally demonstrated that the in situ control of the center wavelength in the 40‐pair DBRs with the ±2% thickness deviations in the initial 5‐pair DBR results in reductions of the deviation down to ±0.3%. The in situ DBR center wavelength control is a key technique for highly reproducible GaN‐based VCSELs.
更多查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要