Nanoscale-doped dual-channel for improved performance and reliability of Hf: IGTO / a-IGTO thin film transistor

Amorphous oxide semiconductors are widely used in the backplane thin film transistors (TFTs) of displays and are extensively researched as materials for next-generation memory devices. However, they face reliability degradation due to stress factors such as thermal, bias, and light exposure. To mitigate these issues, extensive research is focused on improvements, including doping, enhancing crystallinity, and applying pre-and post-treatments. This study investigates the significantly improved reliability and electrical properties of amorphous indium gallium tin oxide (a-IGTO) TFTs by adopting a dual-channel configuration through simultaneous co-sputtering of HfO2 and IGTO targets. The device fabrication involved co-sputtering HfO2 and IGTO at the gate oxide interface, followed by depositing an IGTO-only layer, rather than doping the entire channel material. The effect of varying Hf concentration was evaluated by applying different HfO2 sputtering powers. Optimal hafnium doping reduced the threshold voltage of the a-IGTO TFT from −0.85V to 0.15V compared to the pristine a-IGTO TFT, while enhancing the field-effect mobility (μFE). Furthermore, the Hf-doped device exhibited improved stability, with a reduced threshold voltage shift (Δ Vth) under positive (+15 V) and negative(-15 V) bias stress at 3000s, decreasing from 11.5 V to 4.8 V, and 4.7 V–1.1 V, respectively. This study proposes a novel device fabrication method to enhance the reliability of amorphous oxide semiconductor, addressing their inherent stress-related issues.