Numerical study of rock bridge shape identification and rock bridge damage mechanism

Rock bridges are important structures for maintaining rock mass stability, but their shapes are not well known. The researchers propose a method for determining the shape of rock bridges based on experiments, discrete element methods and machine learning, which is applicable to complex joints with arbitrary spatial distribution. Numerical models are constructed using the discrete element method, and parameter matching is performed based on experimental results. The particles were clustered using the k-means algorithm with the maximum principal stress (σ1) as an indicator and the selection of initial values was optimized. The density-based spatial clustering of applications with noise (DBSCAN) algorithm was used to delete the noise from the particles. Finally, the boundary lines of the particles were extracted by self-programming, and the shape of the rock bridges was determined. Twenty-four sets of simulations were used to analyze the effect of rock bridges on the specimens. The results show that the failure mode of the specimen changes from shear to tensile damage as the cohesive force of the rock bridges increases. The peak strength and peak strain of the specimens increased with the increase of cohesion in the rock bridge. Rock bridges are the fastest growing areas of stress in the specimen.