The breakup and instability structures of liquid jets in subsonic crossflows

The breakup of water and Jet A fuel jets injected transverse into elevated temperature (up to 425° C), combustion pre-heated, subsonic crossflows was investigated by internally fluorescing the liquid jet column. The fluorescent dye seeded test liquids were illuminated by a pulsed laser light that was transmitted within the injector using a quartz rod light-guide. High-resolution images isolating the intact liquid column from light scattered by the surrounding dense spray facilitated precise measurement of the liquid column breakup position and the size and distribution of windward column instability waves. The injector geometry consisted of a 1 mm circular orifice with an orifice length of 20 mm with a tapered inlet. Liquid jet to gaseous crossflow momentum flux ratios were varied from 6 to 266 and the gas Weber number was varied from 10.7 to 228. Empirical correlations were derived for the liquid column breakup coordinates and breakup time in addition to the average and local maximum instability wavelength and amplitude on the liquid column windward surface. The reported correlations provided key insight into atomization physics and aim to support the quantitative validation of high-fidelity numerical simulations of the liquid jet in subsonic crossflow.