Optimizing austenite and carbide content in medium carbon silicon-rich steel: A stepped partitioning strategy and analysis of strengthening and ductility enhancement mechanisms

To achieve the objective of enhancing the yield strength (YS) of quenching and partitioning (Q&P) steel without compromising tensile strength and ductility, a stepped partitioning (SP) strategy was proposed for Q&P treatment on medium carbon silicon-rich steel. The optimized partitioning strategy involves a two-stage partitioning, the first stage is conducted at temperatures above the martensite start (Ms) temperature, followed by the second stage carried out at a lower temperature for an extended period, involving isothermal partitioning. Experimental results demonstrate that the SP strategy yields a significant quantity of small carbides, with an average size of 59.02 nm, along with 15.71 vol% of retained austenite (RA) and a carbon concentration of 1.01 wt% in RA. Furthermore, the SP-treated specimen exhibits a remarkable balance of strength and ductility, showcasing YS, ultimate tensile strength (UTS), and total elongation (TE) values reaching 1732 MPa, 2263 MPa, and 14.9%, respectively. The microstructure evolution during tensile deformation demonstrates that RA in short-duration conventional partitioning specimens underwent premature martensitic transformation during tensile deformation due to early deformation, whereas RA in long time conventional partitioning specimens was overstabilized due to highest C concentration, which resulted in poor enhancement of strengthening and ductility by TRIP effect. In contrast, the SP strategy achieved a reasonable stability of RA, resulting in a simultaneous increase of tensile strength and ductility. Simultaneously, an analysis of precipitation strengthening indicates that the abundance of fine carbides in martensite contributes to an increase in YS due to precipitation strengthening.