In situ coal permeability and favorable development methods for coalbed methane (CBM) extraction in China: From real data

Permeability plays a significant role in the economic viability of coalbed methane (CBM) development. In China, in situ permeability obtained from injection fall-off tests range from 0.0001 to 41 mD at depths of 130-1728 m, with the majority (78%) falling between 0.01 and 1 mD. Coal reservoirs with high rank, common cleat mineralization, and depth-dependent high stress may result in extremely low permeability. Low-rank coal and cataclastic coal exhibit more favorable permeability conditions at shallow depths. Heterogeneity in coal rank, coal texture, and stress magnitude results in a discrete distribution of permeability both regionally and vertically. Most deep seams are highly compressed with extremely low permeability (<0.1 mD) as high stress levels. Multilateral horizontal wells work best with high permeability seams, while vertical wells with conventional hydraulic fracturing demonstrate limited adaptability to deep and low-permeability seams due to insufficient proppant-supported fractures. With increasing depth, both vertical and horizontal wells should employ larger fracturing scales to create effectively supported zones with higher fracture conductivity and reduced stress sensitivity to enhance CBM productivity. Horizontal wells with large-scale volume fracturing demonstrate superior performance compared to vertical wells in extracting CBM from deep, low-permeability, and high gas saturation reservoirs.