Boosting energy harvesting of fully flexible magnetoelectric composites of PVDF-AlN and NiO-decorated carbon nanofibers

The increasing popularity of wearable electronics has sparked interest in flexible energy harvesters as alternatives to conventional batteries. Flexible magnetoelectric (ME) composites, known for converting ambient magnetic field energy into useable power, are emerging as promising autonomous energy sources for integration into wearable devices. In this study, we prepared flexible (PVDF-AlN)–(NiO–CNF) based ME composites using two different methods: solution-casting and electrospinning techniques. The ME coupling was confirmed by measuring the ferroelectric and magnetic properties of the composite, and it was qualitatively characterized through the ME coupling coefficient. The electrospinning fibers-based ME composite exhibited an optimal value of 10.6 V/cm.Oe, significantly higher than the solution-casting films-based ME composite (1.3 V/cm.Oe) under a 1 kHz AC magnetic field (off-resonance condition). Subsequently, a flexible magneto-mechano-electric (MME) generator was designed using electrospun-derived material, harvesting a sinusoidal wave with a maximum output peak-to-peak voltage of 9.02 V. The generator displayed an optimal DC power density of 97 μW/m2 when exposed to a weak AC magnetic field of 6 Oe at a frequency of 50 Hz. Consequently, it holds great promise as an efficient autonomous power supply for medical sensing and various miniature electronic applications.