Novel hydrophobic butyl rubber damping composites modified with bio-based PF/DBA via the construction of a three-dimensional network

It is of interest to develop wide-temperature domain damped hydrophobic materials. In this paper, we designed incorporating bio-based phenolic resin into the IIR matrix and introducing dibenzyl fork acetone (DBA) into the main chain structure with sodium hydroxide activation to construct three-dimensional network. In this paper, we designed incorporating bio-based phenolic resin into the IIR matrix and introducing dibenzyl fork acetone (DBA) into the main chain structure with sodium hydroxide activation to construct three-dimensional network. The added bio-based phenolic resin has reticulated structure blended with butyl rubber, combined with sodium hydride activation-modified IIR. The results show that sodium hydride activated modification of DBA is introduced into the main chain structure of IIR by infrared and 1 H NMR analysis. The material hydrophobic is realized by the introduction of DBA with static water contact angle of 103.5°. The addition of 10phr lignin-based phenolic resin (LPF) is compatible with IIR, and the torque can reach 7.0 N-m. The tensile elongation of the modified butyl rubber composite can reach 2400% with tensile strength up to 11.43 MPa, while the damping factor can reach 0.37 even at 70 °C. The thermal stability of the composites is enhanced with mass retention rate of 28%. The bio-based PF/NaH activation-modified butyl rubber damping material has potential applications in damping hydrophobicity with wide temperature range.