Liquid Metal-Enabled Filtering Switches and Switchplexers

The via-pad-slot (VPS) structure, as the switchable element, has been used to demonstrate a single-pole-triple-throw (SPTT) filtering switch and a switchplexer. The VPS can be flexibily switched using liquid metal (LM) or high dielectric constant materials to either cover or uncover the slot. Since the LM only moves on the surface of the VPS and the substrate-integrated waveguide (SIW), the implementation and actuation of the LM is simple and does not cause excessive loss on the device. In the switchplexer design, all channels can be switched on and off to form filters or multiplexers of various channel combinations. Additional transmission zeros (TZs) can be generated by the loaded, partially switched-off channel. The generation of the TZs was discussed and analyzed using coupling matrix approach. The demonstrated X-band (9.56-10.44 GHz) cross-shaped SPTT fifth-order filtering switch exhibits a suppression level of better than 40 dB at 8 and 12 GHz, an insertion loss (IL) of 1.55 dB at 10 GHz, and an isolation level of 58 dB at 10 GHz. The X-band switchplexer operates at three frequency bands, e.g., 11.08-11.55 GHz, 10.61-10.99 GHz, and 9.76-10.33 GHz. The LM-enabled VPS-based switchable element can be integrated with other multifunctional circuits and systems for channel control and reconfiguration.