Rapid high-throughput processing of tissue samples for microbiological diagnosis of periprosthetic joint infections using bead-beating homogenization.

Enrichment of periprosthetic tissue samples in blood culture bottles (BCBs) for microbiological diagnosis of periprosthetic joint infections (PJI) is more reliable than the use of an enrichment broth. Nevertheless, the extremely time-consuming homogenization of the samples for BCB processing has so far limited its use, especially in high-throughput settings. We aimed to establish a highly scalable homogenization process of tissue samples for long-term incubation in BCBs. A protocol for homogenization of tissue samples using bead beating was established and validated. In a second step, the use of the homogenate for enrichment in BCBs was compared to the use of thioglycolate broth (TB) in terms of diagnostic accuracy using clinical tissue samples from 150 patients with suspected PJI. Among 150 analyzed samples, 35 samples met the microbiological criteria for PJI. Using BCB, 32 of 35 (91.4%) PJI were detected compared to 30 of 35 (85.7%) by TB. The use of BCB had a lower secondary contamination rate (2/115; 1.7% vs 4/115; 3.5%) but the trend was not significant due to low numbers of samples (P = 0.39). The time to process a batch of 12 samples using the established homogenization method was 23 ± 5 min (n = 10 batches). We established and validated a homogenization workflow that achieves the highest sensitivity in the microbiological diagnostic of PJI. The enrichment of the tissue homogenate in BCBs showed equally good results as the use of enrichment broth and allows semi-automated high-throughput processing while demonstrating lower contamination rates in our study.