Exploring a Novel Material and Approach in 3D-Printed Wrist-Hand Orthoses

This article proposes the integration of two novel aspects into the production of 3D-printed customized wrist-hand orthoses. One aspect involves the material, particularly Colorfabb varioShore thermoplastic polyurethane (TPU) filament with an active foaming agent, which allows adjusting the 3D-printed orthoses' mechanical properties via process parameters such as printing temperature. Consequently, within the same printing process, by using a single extrusion nozzle, orthoses with varying stiffness levels can be produced, aiming at both immobilization rigidity and skin-comfortable softness. This capability is harnessed by 3D-printing the orthosis in a flat shape via material extrusion-based additive manufacturing, which represents the other novel aspect. Subsequently, the orthosis conforms to the user's upper limb shape after secure attachment, or by thermoforming in the case of a bi-material solution. A dedicated design web app, which relies on key patient hand measurement input, is also proposed, differing from the 3D scanning and modeling approach that requires engineering expertise and 3D scan data processing. The evaluation of varioShore TPU orthoses with diverse designs was conducted considering printing time, cost, maximum flexion angle, comfort, and perceived wrist stability as criteria. As some of the produced TPU orthoses lacked the necessary stiffness around the wrist or did not properly fit the palm shape, bi-material orthoses including polylactic acid (PLA) inserts of varying sizes were 3D-printed and assessed, showing an improved stiffness around the wrist and a better hand shape conformity. The findings demonstrated the potential of this innovative approach in creating bi-material upper limb orthoses, capitalizing on various characteristics such as varioShore properties, PLA thermoforming capabilities, and the design flexibility provided by additive manufacturing technology.