A Promising Route to Compact and Economic Sub-15 fs, PW-Level Ti:Sapphire Lasers

In quest of achieving compact and economic PW-level Ti:Sapphire (Ti:sa) lasers with a sub-15 fs pulse duration, a modified hybrid amplification scheme, which combines the optical parametric chirped pulse amplifier (OPCPA) and the chirped pulse amplifier (CPA), is presented and numerically investigated in this paper. The key characteristic of this scheme is that the conventional Ti:sa regenerative amplifier and preamplifier are replaced by a dual-crystal OPCPA front-end, which is spectrally matched with the upstream seed source and the downstream Ti:sa amplifiers and, therefore, can realize a broader spectrum. Moreover, some useful laser techniques are also applied to suppress the spectral gain narrowing and redshift in the Ti:sa CPA chain and to control the residual dispersion in the laser system. This way, fewer amplification stages and pump lasers are required to reach PW-level peak power compared with traditional all-CPA Ti:sa lasers. Numerical results indicate that pulse energy and spectral bandwidth can reach up to similar to 22 J and similar to 125 nm at full width at half maximum (FWHM), respectively, only by employing three-stage amplifiers. After compression, PW-level lasers with a similar to 13.3 fs pulse duration are expected. This work can offer a promising route for the development of compact and economic PW-level Ti:sa lasers.