Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites

Temperature and moisture are important environmental conditions governing the usage of carbon fiber-reinforced plastics (CFRP). In this study, tensile, compression, and shear tests of woven CFRP composites were conducted in four composite environments: cold-temperature dry state, room-temperature dry state, elevated-temperature dry state, and elevated-temperature wet state. Fourier transform infrared (FTIR) spectroscopy was used to analyze the molecular composition and structure under these environments. The fracture morphology was also analyzed using scanning electron microscopy (SEM) to understand the deterioration mechanism of the material properties at the macro and micro scales. Finally, a two-parameter Weibull statistical model was used to evaluate the scattering of the composites. The results demonstrate that the tensile, compressive, and shear properties of the material decrease under harsh conditions, and the degradation effect on the ultimate strength is much greater than that of the modulus. Cold-temperature dry and elevated-temperature wet conditions are particularly severe. Composite environments significantly affect the macroscopic failure process and ultimate failure mode of materials. In general, the temperature and humidity of the matrix system acts at the core of the deterioration mechanism of composites, affecting the properties of the fiber/matrix and orthogonal woven fiber interfaces, and eventually resulting in a loss of their constitutive strength and bearing capacity. The theoretical ultimate strength were consistent with the experimental values.HighlightsComprehensive mechanical property testing in multiple composite environments.Degradation mechanisms were revealed from multiscale morphology analysis.Scattering of composites were evaluated using statistical analyses.Cold temperature dry and elevated temperature wet were the worst states.Deterioration effect of environment on matrix and interface is the core failure mechanism. Mechanical property testing, spectral analysis, phase analysis, scattering evaluation and mechanism research of CFRP under various temperature and moisture composite environments.image