A Clutter Identification and Removal Method Based on Long Delay Lines and Cross-Correlation in Through-Wall Detection

Life detection is important in earthquake rescue, but weak vital signal is susceptible to interference by clutters. Due to the undesirable characteristics of the hardware, there are two main types of clutter generated by the frequency modulation continuous wave (FMCW) radar when transmitting signals. One is generated by periodic nonlinearity during frequency modulation, and the other is generated by the phase-locked loop spuriousness (PLLS) in frequency division. They cause additional beat frequencies to appear beside those from the target, leading to false alarms. Since the suppression measures for them are different, it is necessary to distinguish the types of clutter and choose appropriate suppression methods. In this paper, the accurate theoretical modeling of the effects of the periodic nonlinearity and phase-locked loop spuriousness on the beat signal is performed to determine distinctions between them. The clutter occurring in the system used is identified as originating from phase-locked loop spuriousness through fiber-optic experiments. A method using long delay lines and cross-correlation is proposed to identify and remove it. In experiments, the false alarm rate is reduced from over 50 percent to nearly 0 percent, providing strong evidence for the effectiveness of the proposed method in through-wall detection.