A novel macroporous biochar as a biocarrier for DMAC biodegradation: Preparation, performance and mechanism

We produced a new biochar composite from waste bamboo powder and used it as a carrier for N,Ndimethylacetamide (DMAC) biodegradation. Characterization results highlighted the biochar composite's macroporous structure, comprising 72.14% of its total pore volume, facilitating bacterial colonization and growth. In comparison to traditional biocarriers and bamboo charcoal-loaded polyurethane (BC-PU), the biochar composite exhibited faster biofilm formation and achieved stability by the 5th day. Due to the increased biomass on the biochar composite, the DMAC degradation rate reached 80.44%, which was 1.5 times greater than that of BC-PU, indicating its potential for treating DMAC in biofilters. The Fourier transform infrared spectroscopy revealed the presence of abundant oxygen-containing functional groups in the biochar composite, which strongly interacted with bacterial adhesion. Selective passivation of oxygen-containing functional groups extended the biofilm formation time from 5 to 10 days, while the introduction of carboxyl groups expedited it by 1 day. Kinetic studies and the Derjaguin-Landau-Verwey-Overbeek theory demonstrated that the oxygen-containing functional groups reduced the total interaction energy and improved the mass transfer capacity of the biochar surface, thereby promoting biofilm formation. This study introduces a macroporous biochar composite with enhanced biodegradation capabilities, outperforming traditional biocarriers in VOCs degradation in bioreactors. The process provides a new direction for future biocarrier preparation.